2010 Lexus Rx 450h Hybrid Battery Replacement 15 Nos Modules High Capacity

Hyno Energy. Battery Pack Replacement For Lexus RX450H (2010-). 6500mAh 288V, by 15 Nos. of Battery Modules

You can see the energy management activities while driving which includes some "charge level" bars, but they are not in any way an indication of the batteries' health. If you're concerned about the battery longevity, replacement for the hybrid batteries is still a rare thing for even the oldest RX hybrids, and some are documented as having really high mileages (in excess of 200K) with no battery issues at all. Even the standard 12v auxiliary battery lasts a long time. Some folks reporting almost 10 years life on the regular battery. Bottom line is that unless you're planning on keeping the vehicle for 10+ years, you don’t need to worry about the hybrid batteries. On top of that, as battery technology continues to improve, the cost for replacement hybrid batteries is already coming down.

SCOPE

This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,

Model: Hyno RX450H 288

Suitable for: Lexus RX450H (2010-).

Dimension:786×292×109 mm

Approximate Weight (kg): 43

Typical Capacity(mAh): 6500

Minimum Capacity (mAh): 6000

Nominal Voltage (V): 288

Peak Discharge (30C discharge for 10S):Voltage ≥ 192V

Peak Charge (15C charge for 10S):Voltage ≤ 400V

Continuous Discharge (15C discharge for 60S):Voltage ≥ 216V

Working Temperature Range:-40℃ to +55℃

High Temperature Performance ( 55℃ 1C discharge rate):≥90%

Low Temperature Performance (-20℃ 1C discharge rate):≥85%

PERFORMANCE module only

Tests should be done within one month of receiving the goods under the following conditions.

Test condition

Temperature:20±5℃

Relative Humidity:65±20%

Atmospheric Pressure:86～106kPa

Standard charge discharge specification

Discharge: 6000mA (1C) to 168.0V

Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs

Discharge: 6000mA (1C) to 12.0V

GUARANTEE

Product fabrication and material defects are guaranteed within 2 years.

Recommendations: the company's products have been filled 30-90% power in the factory, depending on the shipping distance and packing conditions. When capacity measurement, discharge with 1C to 12.6V/ stick; then charge/discharge with the specified current to test capacity. If the stock reach or exceed 2 months, discharge with 1C to 14.4V/ stick; Then charge with 1C for 54min, 0.2C charge for 1hrs, rest 20min, discharge with 1C to 12.6V/ stick, after 3 cycles; Then charge/discharge with the specified current to test capacity.

For the first use, the standard charge method is recommended to avoid damage to the battery.

CAUTION

When charging the battery, please charge in accordance with the charging method in the product specification. Use the specified charger in the specified temperature range. Do not reverse charge, do not exceed the required charging current, and do not exceed the required charging time. Do not charge only with limited voltage and limited current

1. Do not put the battery into the fire or heating it
2. Do not connect the positive and negative pole with conductive substances such as metals.
3. Do not dissect the battery.
4. Do not refit or damage batteries.
5. Do not solder battery.
6. Do not contacting the battery with water, sea water, or other oxidants.
7. Do not hit, puncture or shock battery.
8. Do not use batteries inconsistent with the equipment.
9. The inside strong alkali with high corrosiveness may burn people. If alkali is hitting eyes, skin or clothing, please drastically clean it with tap water or other clean water and get medical treatment straight away.
10. If the battery does not work properly in the equipment, please refer to the equipment warning and use manual.

Appendix

Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.