Product Details:
Payment & Shipping Terms:
|
Model: | Hyno Prius 202.2 | Nominal Voltage: | 201.6V |
---|---|---|---|
Typical Capacity: | 6500mAh | Minimum Capacity: | 6000aAh |
Battery Shell Included: | No | Dangerous Good: | No |
High Light: | toyota prius battery cell replacement,prius hybrid battery replacement cells |
The battery you imagined is most likely the hybrid battery. And no matter the vehicle, these batteries wear out from a single day of use. The most typical battery you’ll find is Nickel Metal Hydride or NiMH. These batteries are all put together in series to boost the voltage. Here is a look at a Prius Battery module—you can see that it has 6 cells, at a theoretical 0% State of Charge (SOC) the cell has 1V, at a theoretical 100% SOC the cell has 1.5V. You will realistically never see them hang around near 1V, and under regenerative braking, they can sometimes exceed the 1.5V for a short period of time. This module is used for Prius Gen 2 and 3. Gen 1 is very similar.
Item | Specification | |
Dimension | Length (mm) × Width (mm) × Height (mm) | 550 x 294 x 110 |
Approximate Weight (kg) | 30 | |
Typical Capacity(mAh) | 6500 | |
Minimum Capacity (mAh) | 6000 | |
Nominal Voltage (V) | 201.6 | |
High Temperature Performance ( 55℃ 1C discharge rate) | ≥90% | |
Low Temperature Performance (-20℃ 1C discharge rate) | ≥85% | |
Charge Retention Performance (28days charge retention rate) | ≥80% | |
Working Temperature Range | -20℃ to +55℃ | |
Cycle Life (C/2 charge, 1C discharge) | ≥1000cycles | |
The SOC of our battery pack is 60%~80% when leaving the factory, in long-term storage, battery should be stored in a charged state (usually the SOC is 80%). Have a charge and discharge maintenance to battery pack when the storage time is over 6 months or battery module’s voltage is 15V,to prevent the battery performance’s decline caused by the self-discharge. The maintenance regulations are as follows:
Notes: Installing this product should only be attempted by a qualified technician, the voltage of the battery pack is very high, which has the shock hazards, so when installing the battery pack, you should wear insulating gloves and use insulated handle tools.
Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.
Contact Person: Aaron Xiang
Tel: 008615675823200