Product Details:
Payment & Shipping Terms:
|
Single Battery Module Voltage: | 244.8V | Battery Chemistry: | NiMH |
---|---|---|---|
Minimum Capacity: | 6000aAh | Cycle Life: | ≥1000cycles |
Application: | Automative Car Battery-Camry 7th Gen. | Warranty: | Factory Standard |
High Light: | camry hybrid battery cell,toyota camry hybrid battery replacement |
The Toyota Camry is a parallel hybrid; this means it has a gasoline engine and electric motor that are separate from one another. Further, each can run on its own. Toyota designed the Camry so that it would utilize electric power (which it stores in the battery) instead of gasoline power whenever possible. Thus, when you’re at low speeds – like pulling out of the driveway or sitting in heavy traffic – you’ll be running off of the electric motor. Once you start accelerating, this hybrid car requires more energy, so the electric motor alone won’t cut it. During light acceleration, this car will utilize both the electric motor and gasoline engine together to sufficiently power your car.
Tests should be done within one month of receiving the goods under the following conditions.
Test condition
Temperature:20±5℃
Relative Humidity:65±20%
Atmospheric Pressure:86~106kPa
Standard charge discharge specification
Discharge: 6000mA (1C) to 168.0V
Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs
Discharge: 6000mA (1C) to 12.0V
Item | Specification | |
Dimension | Length (mm) × Width (mm) × Height (mm) | 668×29 2×1 09 |
Approximate Weight (kg) | 36 | |
Typical Capacity(mAh) | 6500 | |
Minimum Capacity (mAh) | 6000 | |
Nominal Voltage (V) | 244.8 | |
Peak Discharge (30C discharge for 10S) | Voltage ≥ 163.2V | |
Peak Charge (15C charge for 10S) | Voltage ≤ 340V | |
Continuous Discharge (15C discharge for 60S) | Voltage ≥ 183.6V | |
Specific Power | ≥1000W/kg | |
Specific Energy | ≥40Wh/kg | |
High Temperature Performance ( 55℃ 1C discharge rate) | ≥90% | |
Low Temperature Performance (-20℃ 1C discharge rate) | ≥85% | |
Charge Retention Performance (28days charge retention rate) | ≥80% | |
Working Temperature Range | -40℃ to +55℃ | |
Cycle Life (C/2 charge, 1C discharge) | ≥1000cycles | |
Avoid violent vibration and external force impact, don’t cast, roll, invert, extrude, and stack too high during handling and transportation of battery pack.
Protect the battery pack from rain during the transportation, and the ambient temperature is not over 55℃.
Store the battery pack in a cool and dry place and the temperature range is 5-25℃ when you are not using it.
The SOC of our battery pack is 60%~80% when leaving the factory, in long-term storage, battery should be stored in a charged state (usually the SOC is 80%). Have a charge and discharge maintenance to battery pack when the storage time is over 6 months or battery module’s voltage is 15V,to prevent the battery performance’s decline caused by the self-discharge. The maintenance regulations are as follows:
Notes: Installing this product should only be attempted by a qualified technician, the voltage of the battery pack is very high, which has the shock hazards, so when installing the battery pack, you should wear insulating gloves and use insulated handle tools.
Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.
Contact Person: Aaron Xiang
Tel: 008615675823200