Payment & Shipping Terms:
|Model:||Hyno RX450H 288||Typical Capacity:||6500mAh|
|Minimum Capacity:||6000aAh||Cycle Life:||≥1000cycles|
electric car battery pack,
lexus rx450h battery replacement
Lexus ECVT (Electronically Controlled Continuously Variable Transmission) is an automatic transmission that takes input from two sources: a gas engine + an electric motor...and outputs one driving force to the wheels. Those two power sources, by their very nature, spin at different rates. The ECVT combines them: a function that no regular automatic transmission ever does. Our ECVT is seamless: there is no shifting feel, just smooth power.
When charging the battery, please charge in accordance with the charging method in the product specification. Use the specified charger in the specified temperature range. Do not reverse charge, do not exceed the required charging current, and do not exceed the required charging time. Do not charge only with limited voltage and limited current
This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,
Model: Hyno RX450H 288
Suitable for: Lexus RX450H (2010-).
|3||Nominal capacity||mAh||6500||Standard charge / discharge|
|4||Minimum capacity||mAh||6000||Standard charge / discharge|
|5||Nominal Energy||Wh||1728||1 hour rate|
|6||Weight||Kg||35±0.1||Standard environment,Accuracy±0.05g Electronic scale|
|9||Max. continuous discharge current||C||20||20℃～45℃|
|10||Max. continuous charge current||C||15|
Tests should be done within one month of receiving the goods under the following conditions.
Standard charge discharge specification
Discharge: 6000mA (1C) to 168.0V
Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs
Discharge: 6000mA (1C) to 12.0V
|1||Open circuit voltage (OCV)||V||≥15||Within 1h after charging|
|2||Internal resistance (DC-IR)||mΩ||≤32||50%SOC|
|3||Internal Impedance (AC-IR)||mΩ||≤14.2||1kHz|
|4||Self -discharge rate||%||＜18||55±2℃ rest 3days, 20±2℃ rest 7days|
|7||Cycle Life||Week||＞3000||80%DOD||Charge to 90%, discharge to 10%|
Product fabrication and material defects are guaranteed within 2 years.
Recommendations: the company's products have been filled 30-90% power in the factory, depending on the shipping distance and packing conditions. When capacity measurement, discharge with 1C to 12.6V/ stick; then charge/discharge with the specified current to test capacity. If the stock reach or exceed 2 months, discharge with 1C to 14.4V/ stick; Then charge with 1C for 54min, 0.2C charge for 1hrs, rest 20min, discharge with 1C to 12.6V/ stick, after 3 cycles; Then charge/discharge with the specified current to test capacity.
For the first use, the standard charge method is recommended to avoid damage to the battery.
Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.
Contact Person: Sales Manager