Payment & Shipping Terms:
|Model:||Hyno Prius 202.2||Nominal Voltage:||201.6V|
|Battery Chemistry:||NiMH||Minimum Capacity:||6000aAh|
|Cycle Life:||≥1000cycles||Battery Shell Included:||No|
prius hybrid battery pack,
prius hybrid battery replacement cells
See all the arguments about why the after-market cost is lower. Rebuilding a battery is no small feat. At the end of it, you must be comfortable that all the battery modules have the same amp hours, the same voltage per SOC, the same charge/discharge rate, and relatively the same amount of dendrites (clumping of electrolyte) as their partners. This is done by charging and discharging battery modules one by one with DC chargers, monitoring the temp, voltage, and amperage it takes on the way up and the way down. Over and over, graphing it all, compiling it and deciding which modules must go and which can stay. It’s a lot of work and it might make for a fun hobby, but It takes a long, long time to do it even close to properly. There are machines that will do it for you, though they don’t seem to have much luck. If you plan on specializing in rebuilding batteries, then it’s up to you, let us know how it goes!
This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,
Model: Hyno Prius 202.2
Suitable for: Prius Gen3
Dimension:550 x 294 x 110 mm
Approximate Weight (kg): 30
Typical Capacity(mAh): 6500
Minimum Capacity (mAh): 6000
Nominal Voltage (V): 201.6
High Temperature Performance ( 55℃ 1C discharge rate): ≥90%
Low Temperature Performance (-20℃ 1C discharge rate): ≥85%
Charge Retention Performance (28days charge retention rate): ≥80%
Working Temperature Range: -20℃ to +55℃
Cycle Life (C/2 charge, 1C discharge): ≥1000cycles
The SOC of our battery pack is 60%~80% when leaving the factory, in long-term storage, battery should be stored in a charged state (usually the SOC is 80%). Have a charge and discharge maintenance to battery pack when the storage time is over 6 months or battery module’s voltage is 15V,to prevent the battery performance’s decline caused by the self-discharge. The maintenance regulations are as follows:
Notes: Installing this product should only be attempted by a qualified technician, the voltage of the battery pack is very high, which has the shock hazards, so when installing the battery pack, you should wear insulating gloves and use insulated handle tools.
Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.
Contact Person: Sales Manager